1. Slots and modes.

Ms4r-X-110 include 110 ready combinations located in the memory of the controller. All combination can be saved into the 30 memory locations. Memory locations divided to 3 Slots and every Slot contain 10 Modes. In this way you can create only those modes that you need and save them in any location where you want.

	Mode 1	Mode 2	Mode 3	Mode 4	Mode 5	Mode 6	Mode 7	Mode 8	Mode 9	Mode 10
Slot 1	1	2	3	4	5	6	7	8	9	10
Slot 2	1	2	3	4	5	6	7	8	9	10
Slot 3	1	2	3	4	5	6	7	8	9	10

For example you can use every Slot for the different games (like Slot 1 for COD7, Slot2 for GOW, etc) or you can use them for different types of weapons (like Slot 1 for Sniper riffles, Slot 2 for Automatic weapons, etc).

2. Default modes.

You will receive your controller with 30 default modes. All these modes are ready to play modes, but you can edit them or create new combinations.

Click here to download 30 default modes.

Click here to see/hide 30 default modes.

3. Button combinations.

To use your controller remember only 7 button combinations.
1. Enable/Disable Ms4r-X-110: Hold Left Dpad + tap one time LT.
2. Next Slot: Hold Left Dpad + tap one or a few times B.
3. Previous Slot: Hold B + tap one or a few times Left Dpad.
4. Next Mode: Hold Left Dpad + tap one or a few times A.
5. Previous Mode: Hold A + tap one or a few times Left Dpad.
6. To show current Slot and Mode (when Ms4r-X-110 enabled): Tap one time Left Dpad and count flashes.
4th LED show Slots and 3rd LED show Modes.
7. Turn ON/OFF programming mode: Hold Left Dpad + tap one time RT (Please, don't try this combination until you read how to program your controller).

4. How to use 1st time.

For the first time Ms4r-X-110 will be disabled and your controller will be as normal controller.
To enable Ms4r-X-110:
1. Push and hold Left Dpad + tap one time LT.
2. 4th LED and 3rd LED will be ON.
3. Release Left Dpad.
4. 4th LED will flash one time and then 3rd LED will flash one time.
Note: 4th LED show Slots and 3rd LED show Modes.
4th LED one flash and then 3rd LED one flash mean Slot1 and Mode1.
Slot1 and Mode1 is Rapid Fire - 7sps (see Default modes).
5. Choose any semiautomatic weapon and push RT to shoot with Rapid Fire.

5. How to change Slots and Modes - Example.

Let's choose Slot 2 and Mode 5 - Jitter XYY - 20sps (see Default modes).
As you remember we are on Slot1 and Mode1. To be sure tap one time Left Dpad.
4th LED should flash 1 time and 3rd LED should flash 1 time (Slot1 and Mode1).
1. To choose Mode5 hold Left Dpad + tap A 4 times (Mode1+4=Mode5).
2. Release Left Dpad.
3. 4th LED will flash 1 time and 3rd LED will flash 5 times (Slot1 and Mode5).
4. To choose Slot2 hold Left Dpad + tap B 1 time (Slot1+1=Slot2).
5. Release Left Dpad.
6. 4th LED will flash 2 times and 3rd LED will flash 5 times (Slot2 and Mode5).

6. Master Reset.

You can reset your controller back to factory defaults at any time! All speeds and mods will go back exactly where it was when you opened your controller.
1. Turn OFF your controller.
2. Push and hold B button.
3. Turn ON your controller.
4. 4th LED and 3rd LED will be ON for about 2 seconds.
5. Release B button.

How to use XBOX 360 Ms4r-X-110 Rapid Fire Mod.